ICOM IC-7700

[Antenna line]

BNC type RX IN/OUT connectors for receiver antenna or external attenuator

General coverage receiver covers from 30kHz to 60MHz
(* Some frequency bands are not guaranteed, depending on version)

4-step attenuator (6/12/18dB and OFF)
Twin peak audio filter for RTTY operation

Low distortion RF speech compressor
Tx monitor

50 CTCSS tone encoder and decoder
All mode power control

VOX capability (Voice operated transmission)

Multi-function electronic keyer with adjustable keying speed, dot-dash ratio and paddle polarity and bug key function
DSP controlled CW keying waveform shaping
Frequency lock function for split operation
The normal (default) CW carrier point is selectable from USB and LSB
APF (audio peak filter) function with soft/sharp filter shape
Double key jack system
Full break-in function
CW pitch control from 300 to 900Hz
CW/AM auto tuning function

Set mode function for flexible and speedy setting
Memory pad stores up to 10 (or 5) operating frequencies
Quick split function enables split operation with a single action
SSB/CW synchronous tuning
Single knob control from squelch volume to RF gain
RIT and ∂Tx variable up to ±9.999kHz
Quick RIT/∂TX clear function
UTC/Local Clock and timer function
1Hz pitch tuning and 1Hz indication
101 memory channels with 10-character comment
Built-in voice synthesizer announces operating frequency, mode and receiving signal strength
Programmed scan, memory scan, select memory scan, VSC scan and ∂F scan
Auto tuning step function
Band edge beep
Main dial tension control and dial lock
CI-V interface capability and RS-232C connector for PC connection
BNC type Transverter connector

Triple band stacking register

FFT scope wave averaging function

Screen saver function

Submit a Comment


Posted on

November 7, 2020

error: Content is protected !!