Features:
* TWO Totally Independent Receivers
* SUPERB 112 dB Dynamic Range and +40 dBm 3rd-Order Intercept (VFO-A/Main Receiver at 14 MHz, 500 Hz filter, 600 Hz roofing filter, 10 kHz spacing, IPO1 set)
* Super sharp “Roofing” filters for VFO-A/Main Receiver; selectable between 300 Hz, 600 Hz, 3 kHz (6-pole crystal filter), 6 kHz, 15 kHz (4-pole MCF)
* 300 Hz filter was optional for FTDX 5000 and FTDX 5000D (both discontinued). It is included in the FTDX 5000MP Limited
* High Performance Yaesu Custom-designed 32-bit Floating Point DSP: The legendary high performance Yaesu Custom-designed 32-bit Floating Point DSP based on the TI TMS320C6727B (operating at 300 MHz clock frequency), one EACH for VFO-A and VFO-B
* Variable CW Audio Peak Filter, and High/Low-Cut filtering created through the very latest in DSP technology
* CW Width: 50/100/150/200/250/300/350/400/450/500 Hz
* CW Pitch Frequency: 300 to 1050 Hz (10 Hz Steps)
* True Analog Meter Precision: Enjoy the same extra-large metering system as the FT DX 9000 series with true analog precision and instant reaction time
* Enjoy new function displays for ease of operation: Three Electro-Luminescence displays are included for easier operation and control of the Sub-Frequency, Graphical Wave and Menu functions
* IF Output Available: IF Output (9 MHz) from VFO-A/Main Receiver
* Practical Level Indication System for most important settings: FTDX 5000MP Limited transceivers provide loads of practical level indications that clearly show settings of Mic-Gain/RF Power/CW-Pitch/Keyer Speed/Processor Level/VOX Delay Time and Break-In Delay Time